Concrete & Soil
We are providing physical & chemical testing of soils, aggregates, cement, lime plaster concrete, concrete products & bituminous materials non-destructive testing of concrete such as Ultrasonic test, half-cell potential, rebound hammer, concrete resistivity and tomography (MIRA) is also within the scope of AHS civil materials testing disciplines.
Provision of qualified & experienced staff for field inspection, testing & sampling such as FDT by Nuclear or Sand-cone Method, plate Load test, laboratory and field CBR test, concrete durability tests, pull-out & adhesion testing, surface moisture of concrete testing thermography, low strain test for cast-in-situ concrete piles, concrete temperature monitoring & load testing of concrete structural elements. Also, provision of mobile construction testing laboratory with qualified & experienced personnel for field inspection, sampling & testing.
CONCRETE SECTION
| 1 | Slump |
| 2 | Temperature |
| 3 | Visual inspection |
| 4 | Air content |
| 5 | Density and specific gravityC |
| 6 | Casting Cylinders /Cubes to determine compressive strength and durability test or casting beam samples for flexural strength test |
| 1 | Curing of concrete samples, Measurements /Density Capping & Compressive strength Testing on hardened concrete cylinders/ Cubes cast on site. |
| 2 | Flexural Strength |
| 3 | Indirect tensile strength |
| 4 | Durability Test |
| 5 | RCPT-Rapid Chloride Penetration Test. |
| 6 | Initial Surface Absorption Test (ISAT) |
| 7 | Water absorption test |
| 8 | Water penetration test. |
| 1 | UPV testing -Ultra Sonic Pulse Velocity Tests |
| 2 | Rebound Hammer test for concrete stress |
| 3 | Core testing |
| 4 | Tomography (MIRA) test reveals the quality of concrete in 3D and shows problems |
| 5 | Ferro Scan test is used to detect rebar, its directions and sizes |
| 6 | The GPR test is used to detect iron, pipes, and everything that is inside the concrete |
| 7 | Concrete scanning test to detect steel reinforcement, its sizes and directions |
| 8 | Loading test on slabs to ensure that the slab can bear the loads placed on it |
| 9 | integrity Testing to ensure the quality of piles |
| 10 | Visual inspection and evaluation of systems |
SOIL AND AGGREGATE SECTION
| 1 | Washed Sieve analysis |
| 2 | Moisture Content |
| 3 | Liquid Plastic Limit |
| 4 | Moisture Density Relation ship |
| 5 | CBR Test |
| 6 | Field Density Test |
| 7 | Plate Load Test |
| 1 | Washed Sieve analysis |
| 2 | Los Angeles Abrasion Test |
| 3 | Soundness Test |
| 4 | Specific Gravity Test |
| 5 | Flakiness & Elongation Test |
| 6 | Sulphates & Chloride Test |
| 7 | 10% fines |
| 8 | Impact Value |
| 9 | Shell Content |
ASPHALT SECTION
| 1 | Temperature of Hot Mix |
| 2 | Sampling of Hot Mix |
| 3 | Rate of Spray -MC/RC |
| 4 | Asphalt Coring |
| 1 | Bitumen Content |
| 2 | Sieve Analysis |
| 3 | Marshall Stability & Flow |
| 4 | Max.Theoretical Density of asphalt mix |
| 5 | Loss of Stability Test |
| 6 | Thickness & Density of asphalt Cores |
Address
Al Khobar Al Taawun,
Al Khobar 34622,
Saudi Arabia